E400 is a small air decontaminator unit designed to be placed on the floor. The unit draws in indoor air from the front and blows out the clean air through the fan placed on the backside of the unit. The unit has two power areas and it is designed for continuous usage. E400 is easy to move as it...
Nanoscale air decontamination
Advanced, easy-to-install solutions for nanoscale air decontamination.
The patented Genano® cold plasma technology eliminates bacteria and viruses effectively.
HEPA filters are commonly utilized to filter supply air flow in a cleanroom. However, it can only collect particles of 0.3 μm and larger in diameter, which renders a need for additional air decontamination technologies such as air purifier units in the room. Majority of nanoparticles in cleanrooms are process-related and must be effectively removed at the source. While most particles in cleanrooms can be related to human activity, ultra fine particles are also generated by electrostatic discharge, chemical reactions such as oxidation, and gas phase nucleation. These contaminants cannot be removed with fixed HVAC interfaced HEPA filtering systems.
Genano's air purifiers do not contain any easily clogged, regularly replaceable filters, so their performance remains constantly high and they are easy to use – and no replaceable parts means low running costs. The system does not suffer from increase in pressure drop due to accumulation of particle mass, nor does it provide substrate for microbes to grow.
Building cleanrooms with Genano is highly cost-efficient and fast compared to traditional HEPA systems. Only minor piping work is needed to connect the Genano air purifier to central ventilation. All of the supply air enters the room through the unit, while air flow is controlled to create positive pressure difference to outside environment. A second unit is utilized to constantly circulate and purify the air from any process and human-related contaminants.
Elixair duct filter supplements the existing air ventilation system. The duct filter is highly effective, requires conjunctional installation in the fresh air duct, as it filters out the smallest of particles from the supply air, preventing them from entering the room. The duct filter does not...
TwinGuard is a connected temperature and humidity metering device for demanding environments with long battery life.
The device is equipped with two external sensors. External temperature and humidity sensors can be freely installed, for example in air duct or different building materials...
TempGuard is a temperature metering device for demanding surroundings and comes with Sigfox Iot-network and long operating time. The device is equipped with two external temperature sensors and one internal temperature sensor.
External temperature sensors can be freely installed, for...
PressGuard is a connected pressure difference meter. The device measures the pressure difference between two measurement points e.g. building indoor and outdoor air.
The device measures and sends the pressure difference data once in every 30 minutes, using a worldwide Sigfox IoT-network for...
Detectify is a motion detector for indoor and office purposes. It is based on a passive infrared sensor with a detection area up to 5 meters.
The detector is available in two versions: with either a 30 degree measuring beam or over 90-degrees measuring beam. The device is perfect for...
AirWits PM is a multipurpose meter, equipped with high-quality sensors. It measures the amount of indoor air particles, air temperature and the relative air humidity.
The device measures and sends the PM 2,5 µg, temperature and humidity data once in every 30 minutes. AirWits PM uses...
AirWits TVOC is a multipurpose meter, equipped with high-quality sensors. It monitors the amount of TVOCs, indoor air temperature and the air humidity.
The device measures and sends the TVOC, temperature and humidity data once in every 30 minutes. AirWits TVOC uses worldwide Sigfox IoT-...
AirWits CO2 is a multipurpose meter, equipped with high-quality sensors. It monitors the carbon dioxide levels, indoor air temperature and the air humidity.
The device measures and sends the CO2, temperature and humidity data once in every 30 minutes. AirWits CO2 uses worldwide Sigfox IoT-...
Wall or ceiling -mounted Genano Tube is suited for hallways or lobby areas. The air contamination unit can be integrated as part of an existing air ventilation system.
Comes with IoT
Genano Tube’s system is controlled with remote control.
Integrate as a part of existing...
Wall or ceiling -mounted Genano XS is suited for cleaning air in spaces, where it can not or is not wanted to be placed on the floor. This air decontamination unit can also be placed on level surfaces or it can be integrated as part of an existing air ventilation system.
Can be installed...
Efficient and compact Air Decontamination Device for patient rooms, examination rooms, dentist’s practices and offices. Requires very small floor space, and has a wall-mounting option.
The unit requires little floor space which makes it particularly suitable for offices and commercial spaces.
Wall mounting available as additional option.
Clean white (shiny)
Min. 6 unit...
Efficient and compact air decontamination unit suitable for classrooms, healthcare spaces, offices and commercial spaces.
Versatile and compact
Ultrapure air efficiently
For classrooms, healthcare premises and offices
Genano air decontamination unit with superior cleaning capacity for spaces with high contamination risk. It is suited for cleanrooms, such as laboratories or isolation rooms. The air decontamination unit is also created for R&D production areas, where ultrapure air is required.