The high-spring constant RMN probe: 250 N/m (± 40%)
The 25Pt200B-H has a high frequency for use in non-contact and tapping mode AFM measurements, especially c-AFM and KPFM.
Material: Solid platinum probe tip and cantilever supported on standard AFM probe sized ceramic chip, connected to conductive gold bonding pad with conductive epoxy.
- Tip shank length: 80 μm (± 25%)
- Cantilever length: 200 μm (± 15%)
- Cantilever width: 50 μm (± 15%)
- Spring constant: 250 N/m (± 40%)
- Frequency: 100 kHz (± 30%)
- Tip radius: < 20 nm | < 10 nm tip radius available! (25Pt200B-H10)
Probes designed specifically for the Keysight (Agilent) Scanning Microwave Microscope (SMM) add-on have the letter A rather than B (ie 12Pt400A).
News, events, promotions, webinars
Technical Features
Material: Solid platinum or platinum-iridium probe tip and cantilever supported on standard AFM probe sized ceramic chip, connected to conductive gold bonding pad with conductive epoxy. RMN also has probes available without gold contact pad, to help reduce stray capacitance.
Probes on standard sized substrates have a part number ending in the letter B (i.e. 25Pt300B).
Probes designed specifically for the Keysight (Agilent) Scanning Microwave Microscope (SMM) have the letter A rather than B (i.e. 12Pt400A).
Additional substrates:
- C - Substrate without gold bonding pad, to help reduce stray capacitance (= to A dimensions)
- D - Substrate has a 200um gold transmission line the entire length of the chip and the back is completely covered in gold (standard size chip)
- E - Substrate has the same features as the D substrate, only it is thinner (5 mil thick)